Window tint rarely affects a front dash cam, because WA rules only allow tint on the top band of the windscreen. Rear cameras are different. Filming through a dark rear window cuts the light reaching the lens, so night footage can turn grainy and number plates harder to read. Choosing the rear shade and camera position carefully avoids most problems.
More Perth drivers are running front and rear dash cams for insurance claims, road rage incidents and peace of mind. At the same time, tint is one of the most popular upgrades for keeping a car cool. The two usually get along fine, but there are a few things worth knowing before you tint, especially if you rely on a rear camera after dark.
Where can tint go on a windscreen in WA?
Under the WA Department of Transport tint rules, film on the windscreen is only allowed in a band across the top. The rest of the windscreen stays clear. Front side windows need at least 35% visible light transmission (VLT), and rear side windows and the rear windscreen need at least 20% VLT, provided the vehicle has exterior mirrors on both sides. Reflectance can’t exceed 10%.
For a front camera, that means the lens is normally looking through clear glass. The one catch is mounting height. Many people tuck the camera up behind the rear-view mirror, and depending on the car, that can put the lens behind the tinted band. Mount the camera so the lens sits just below the band and you’ll keep the clearest view.
Our page on window tinting laws explains VLT and how it’s measured in more detail.
How does rear window tint affect a rear dash cam?
VLT is the share of visible light that gets through the glass and film together. At 20% VLT, the minimum for rear glass when the vehicle has exterior mirrors on both sides, only about a fifth of the light outside reaches the camera. In daylight, there’s plenty of light to spare, and most cameras record clearly. At night, the camera is working with much less, so it raises its sensitivity. That brings digital noise, motion blur and smeared headlights, which is exactly when you’d want a sharp image of the car behind.
Here’s a rough guide to what to expect:
| Rear glass | Daytime footage | Night-time footage |
|---|---|---|
| Clear or factory-tinted only | Clear | Best possible for the camera |
| Lighter film, around 35% VLT | Clear | Slightly darker, usually usable |
| Film at the 20% limit (exterior mirrors both sides) | Clear, a little darker | Noticeably darker and grainier |
These are general patterns, not guarantees. Camera quality, street lighting and the car’s own factory glass all change the result.
Does factory privacy glass make it worse?
It can. Many SUVs and utes come with darker rear glass from the factory. Film added on top combines with the glass, so the overall VLT ends up lower than the film’s rating alone. If your rear glass is already dark, adding more film makes a bigger difference to the camera than on a car with clear glass. A good installer will meter the glass to keep the result legal.
Which tint shade works best with a rear camera?
If night-time footage from the rear camera matters to you, a slightly lighter rear shade is worth considering. You still get the heat and UV benefits of film, but the camera has more light to work with. Plenty of drivers are happy with the legal limit, especially if their camera handles low light well.
The type of film matters too. Quality ceramic tint is designed for strong heat rejection without needing to be very dark, so you’re not forced to choose between a cool cabin and a usable camera. Cheaper dyed films can fade or haze as they age, which softens footage over time. Trident fits Rayno Phantom nano carbon ceramic film in S5, S7 and S9 grades, and it is dye-free and metal-free, with up to 99.9% UV rejection.
Does the camera itself make a difference?
Often more than the tint does. A few features help a rear camera see through tinted glass:
- Good low-light performance. Cameras marketed for night recording handle dark glass much better than basic units.
- Wide dynamic range (WDR or HDR). Helps balance bright headlights against dark surroundings.
- Lens close to the glass. Mounting the lens tight against the window reduces reflections from inside the cabin.
- Clear of the demister lines. Position the lens between the heating elements so they don’t cross the image.
Front cameras benefit from a polarising filter, which reduces the reflection of the dashboard on the windscreen. That’s a better fix for glare than trying to tint the windscreen.
Should you fit the dash cam before or after tinting?
Rear cameras are usually stuck to the inside of the rear glass with an adhesive pad. If the car is being tinted, that pad ends up sitting on the film. Fitting the camera after tinting is generally the neater option, so the film goes on as one clean piece.
Give new film time to settle first. Tint needs a few days to cure, and the same advice that applies to keeping windows up for three to five days after tinting applies to sticking anything to fresh film. Removing an adhesive mount later can lift or mark the film, so choose the position carefully the first time.
If a camera is already fitted to the rear glass, it has to come off before the film can be applied, then be refitted once the film has cured.
For more on how tint affects your own view after dark, read our article on seeing out of tinted windows at night.
Frequently asked questions
Can I tint my windscreen to cut dash cam reflections?
Not beyond the top band in WA. A polarising filter on the camera is the usual fix for dashboard reflections.
Will tint block my dash cam’s GPS or Wi-Fi?
Metal-free films such as ceramic and carbon tints aren’t known to interfere with these signals. Metallised films are the type more likely to cause trouble.
Is a rear camera useless behind 20% tint at night?
No. On a car with exterior mirrors on both sides, 20% is the legal minimum for rear glass, and most cameras still record through it, just with less detail. A good low-light camera and careful positioning make a big difference.
Can I stick a camera mount on new tint straight away?
It’s better to wait until the film has cured, usually a few days, so the mount doesn’t disturb it.
See the window tinting page for film options, or check our FAQs for more answers.
Tint that works with your camera
Most cars are tinted in 2-4 hours. Visit 45 Berriman Drive, Wangara or Unit 6/1780 Albany Highway, Kenwick, or call 0482 689 885 for a quote.



